Connect The Main Base And Charging Cradle - Uniden XS1215 Series Owner's Manual

C. Connect the Main Base and Charging Cradle (XS1215+1 only), and Charge
the Handsets
DCIN 9V
1) Connect each AC adapter to the
to each standard 240V AC wall outlet.
2) Place one handset in the main base (and the other
in the charging cradle - XS1215+1 only) with the
keypad facing forward.
3) Make sure the charge/in use LED (and
LED - XS1215+1 only) illuminate. If the LED does
not illuminate, check to see that the AC adapter is
plugged in and the handset makes good contact
with the cradle's charging contacts.
• Connect each AC adapter to a continuous power supply.
• Place each cradle close to the AC outlet to avoid long extension cords.
4) Charge your handset(s) at least 15-20 hours before
plugging the phone line.
5) Once the handset battery pack(s) are fully charged,
connect the telephone line cord to the
jack and a telephone outlet. If your telephone outlet
isn't modular, contact your telephone
company for assistance.
jack and
charge
(XS1215+1 only)
TEL LINE
Australia
Telephone cord adaptor
(not supplied)
[8]
! Use only the
supplied AAD-
210 AC adapter.
Do not use any
other AC
adapter.
! Do not place the
power cord
where it creates
a trip hazard or
where it could
become chafed
and create a fire
or electrical
(XS1215+1 only)
hazard.