Table of Contents
Advertisement
You must subscribe to Caller ID service through your local telephone provider to use this feature.
1) When the phone is in standby mode, press and hold the
caller id/menu
key. The following screen appears.
2) Press the
/vol/
key to select
CIDCW.
3) Press the
select
key (XS1215) or the
key (XS1215+1) to toggle and turn on Caller ID on Call
Waiting.
4) Press the
end
key or return the handset to charging
cradle to complete the setting. The handset returns to
standby mode.
Setting Name Tag (POP ID)
The Name Tag feature works with the Caller Display number from Caller ID. You must subscribe to
Caller ID service through your local telephone provider to use this feature. There is usually a fee for this
service. When the phone rings the caller display number, when received will be compared to numbers
stored in the dial memory. If there is a match any name stored with the dial memory number will be
displayed (see page 23).
1) When the phone is in standby mode, press and hold the
caller id/menu
key. the following screen appears.
2) Press the
/vol/
key twice to select
3) Press the
select
key (XS1215) or the
key (XS1215+1) to toggle and turn Name Tag
4) Press the
end
key or return the handset to charging
cradle to complete the setting. The handset returns to
standby mode.
[15]
Name Tag
select/channel
Name Tag
Name Tag
Name Tag
.
select/channel
or
on
off.
Name Tag
:On
:On
:On
:On
Advertisement
Table of Contents
