Table of Contents
Advertisement
Installing the handset battery pack
Charge the battery pack for 15 - 20 hours before you start using
your phone.
Black
status LED
Use only Uniden Battery (BT-905) supplied with your
phone.
1
Press the battery cover
release.
2
Connect the battery pack
connector with the correct
polarity (black and red
wires), then insert the battery
pack into the battery
compartment.
Red
3
Slide the battery cover
forward until it snaps into
place.
4
Place the handset on the
base.
5
Make sure that the status
LED lights. If the LED
doesn't light, check to see
that the AC adapter is
plugged in and that the
handset makes good contact
with the base charging
contacts.
9
Advertisement
Table of Contents
