Storing A Phone Number In Memory; Dialling A Numberin Memory; Changing A Stored Number From Memory; Pausefunction - Uniden DS70 Owner's Manual

The pause button counts as
one digit. Pressing
Redial/Pause more
than once increases the
length of pause between
numbers.
. .-.
STORING A PHONE NUMBER IN MEMORY
1.
Make
surethe handset is in standbymode (In Use lightis OFF).
2. Press the Memory button on the handset.(the In Use light will
begin flashing
3. Enter the phone number,up to 16digits
4. Press Memory again
5. Enter the two digitmemory locationnmber (01-
20) on the keypad(the In Use lightwill stopflashing
and you willhear two conflfmationbeeps.
6. Repeatthese stepsto storeadditionalphone numbers.
PAUSE FUNCTION
~
.,. - ...
_.-
....
lIIal"'lI
a-a
I
In some cases, such as PABX or long distance service, a pause may be needed in the
dialling sequence. Pressing the Redial/Pause button on the handset inserts a
2 second delaybetween dialled numbers. Pause(s)can be inserted into the programmed
dialling sequence in memory locations.
DIALLINGA NUMBER IN MEMORY
. .
1. Press Talk/End
2. Press Memory
3. Enter the two digit memory location number (01-20).The number
automatically dials.
CHANGING A STORED NUMBER FROM MEMORY
Follow the steps in the section Storing a Phone Number in Memory. The new
phone number will automatically replace the previous one.
15