Uniden DECT2015+2 Owner's Manual page 45

Place the mounting slots over
the pins on the wall plate.
Slide the base
down to lock it
into place.
Removing the wall-mount bracket
At the bottom of the base,
pinch the two "nose" of
the wall-mount bracket
as shown, and then
slide the bracket away
from the base.
DECT 2015+1 OM.indb 45
Wall plate
Note: Mounting the phone directly on the wall
• Be sure the wall is capable of supporting the
weight of the phone, and use the proper type of
anchoring device for the wall material.
• Insert two #10 screws (minimum length of 35mm,
not supplied) into the wall, 100mm apart.
• Leave the screw heads 3mm away from the wall
to allow room for mounting the phone.
• Align the mounting slots over the screws and
slide the base down into place as shown above.
45
(To AC outlet)
7/7/08 12:31:08 PM