Uniden UBC 220XLT Operating Manual page 9

Front View
(Refer to the foldout ill ustration inside the Back Cover)
Complete explanations of the use of these keys are in the
Scanning section, page 16, and Searching section, page20.
1. LCD DISPLAY - The liquid crystal display (LCD)
shows the current channel and frequency. It also
displays the mode, status, and bank indicators.
A. Scan Type Indicator - Indicates BANK Scan
operation.
Channel Number - Indicates the current
channel that the scanner is on.
Memory Bank Numbers - Each Memory
Bank consists of 20 channels that you can
select or deselect during scanning operation,
using the numeric keypad. When you select a
Bank, its number appears on the display. When
you deselect a Bank, its number di~pears
from the display. When you press ~to stop
scanning, only the Bank of the current channel
appears.
Low Battery Indicator
- Appears on the
display when the Battery Pack is Iow and needs
recharging.
Frequency Indicator
- 7 -digits plus decimal
indicate the frequency being received by the
scanner.
B.
C.
D.
E.
F.
Mode
Indicators
-
(Only the active mode(s)
are displayed during operation)
DATJ(
Indicates DATA SKIP activated
during SEARCH.
SCN Indicates SCAN Mode.
SACH Indicates SEARCH Mode. Flashes
when in TURBO SEARCH Mode.
PAl Indicates PRIORITY SCAN Mode.
HOLD IndicatesSCAN HOLD, or SEARCH
HOLD.
DLY
UO
Indicates DELAY is activated.
Indicates the channel shown is
"Locked Out".
Indicates
WEATHER SCAN Mode.
wx
7
., _.
I