Setting The Function Mode; Setting Hold Timer - Uniden UBC-RH96 Owner's Manual

Setting the Function Mode

If you scroll to the Handy Option menu, you can
highlight
Set Func Mode Set Func Mode
Select this to choose between
Set Auto Release Set Auto Release .

Setting Hold Timer

When you select this option, you can scroll through
and select from fi ve settings. The setting determines
how long the knob acting as the FUNC control is
enabled each time you press it if you do nothing else.
UBC-RH96 Digital Scanner OM.indd22 22 UBC-RH96 Digital Scanner OM.indd22 22
.
Set Hold Timer Set Hold Timer and
The fi ve settings are:
Off: Function mode is continuously enabled only
while pressing the Control or SQ knob.
3 sec: Function mode is enabled for 3 seconds after
releasing the Control or SQ knob.
5 sec: Function mode is enabled for 5 seconds after
releasing the Control or SQ knob.
10 sec: Function mode is enabled for 10 seconds after
releasing the Control or SQ knob.
Infi nite: Function mode is enabled until the Control or
SQ knob is pressed again (default).
22
10/9/07 4:16:04 PM 10/9/07 4:16:04 PM