Setting The Ubc-Rh96 Backlight - Uniden UBC-RH96 Owner's Manual

When you turn the Remote
Head off, you see the screen
to the right which reminds
you that power is still
applied to the target scanner.

Setting the UBC-RH96 Backlight

To adjust the backlight brightness level on the Remote
Head, repeatedly press the VOL control. The display
cycles through available backlight brightness levels,
including off. Stop when you reach the desired level.
UBC-RH96 Digital Scanner OM.indd17 17 UBC-RH96 Digital Scanner OM.indd17 17
Powering down Powering down
the remote head the remote head
does not turn does not turn
off the Scanner off the Scanner
17
Brightness Auto-Adjust (mobile scanners only)
When you connect a mobile scanner, the Remote Head
automatically adjusts its backlight brightness level to
match the brightness level of the target mobile scanner.
If you change the brightness level on either the Remote
Head or the target scanner, the level changes on
both devices at the same time. (This function is not
available on Handy Scanners.)
10/9/07 4:16:02 PM 10/9/07 4:16:02 PM