Assembly Instructions - Stamina AeroPilates PRO Series Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at customer.care@staminaproducts.com, or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
NOTE: We recommend that two people be available for assembly of this product.
STEP 1
Refer to illustration 1. To connect the RAILS: Insert the CONNECTING BRACKETS(11) into the FRONT
LEFT RAIL(7) and FRONT RIGHT RAIL(8) and secure with BUTTON HEAD BOLTS(M8x1.25x10mm)
(55). Do not tighten the bolts until STEP 2.
STEP 2
Insert the CONNECTING BRACKETS(11) into the REAR LEFT RAIL(9) and REAR RIGHT RAIL(10) and
secure with BUTTON HEAD BOLTS(M8x1.25x10mm)(55). Tighten all of the bolts.
STEP 3
Refer to illustration 2. There is an "A" decal on the STOP BRACKET A(23) and a "B" decal on the STOP
BRACKET B(24). Move the PLATFORM(26) toward the REAR BRACE(12). Attach the STOP BRACKET
A(23) to the FRONT RIGHT RAIL(8) with BUTTON HEAD BOLTS(M8x1.25x24mm)(57). Attach the STOP
BRACKET B(24) to the FRONT LEFT RAIL(7) with BUTTON HEAD BOLTS(M8x1.25x24mm)(57).
REAR
1.
8
2.
Mark "A"
FRONT