Using Multi-Handset Features - Uniden WXI3077 User Manual

If...
-
you don't hear a dial tone
-
The display says
If a handset was previously registered to a base, you have to reset it
Registration Failed
so you can register it to a new base (see page 24 or the manual for the
accessory handset).
To use the features in this section, you must have at least two cordless

Using Multi-Handset Features

handsets.
When an outside call comes in, two handsets can join in a
Conference calling
conference call with the outside caller.

To join an ongoing call, press
To leave the conference call, hang up normally; the other handset

remains connected to the call.

You can prevent other handsets from joining a call. Start your call
Privacy mode
as usual, then press
Press again to turn privacy mode on (you'll see
MEnU/sELECT
display). When you hang up, privacy mode turns off automatically.
MEnU/sELECT
As long you have privacy mode on, no other handsets can interrupt
your call. To allow another handset to join the call, press
twice to turn privacy mode off.
1
try...
Making sure the handset is fully
charged, then starting over from the
beginning of this section.
or .
TaLk/fLash spEakEr
; the display shows
Call Privacy
MEnU/sELECT
Call transfer
to...
transfer a call
cancel a transfer and leave
the call on hold
cancel a transfer and
return to the call
answer a call transfer page
Whenever the phone is in standby, you can make an intercom call
Intercom call
between handsets without using the phone line.

You can make an intercom call from any handset, but only two
handsets can be in an intercom call at any time.

.
If an outside call comes in during an intercom page, the phone
in the
sounds a tone and shows any received CID information. If another

handset hasn't answered the page yet, the phone cancels the page
to let you can answer the incoming call.
to...
make an intercom page
cancel a page
answer an intercom page
leave an intercom call
Do this...
Press , then select the
CLEar/inTErCoM
handset you want to transfer the call to
(select All to page all the handsets). When
the other handset accepts the call, you'll be
disconnected.
Press .
End
Press .
TaLk/fLash
1. Press . You can speak to
CLEar/inTErCoM
the transferring handset.
2. To speak to the outside caller, press
.
TaLk/fLash
Do this...
Press , then select the
CLEar/inTErCoM
handset you want to talk with (select All
to page all handsets at the same time).
Press .
End
Press or
CLEar/inTErCoM TaLk/fLash
Press .
End
.
1