Color profile: Disabled
Composite
Default screen
dup
mon
channel/
volume
scan
charge 1
Place the UH041P into the charge cradle. The charge light will
come on to indicate the unit is charging. Before operating the
UH041P , charge the battery pack for 16 hours.
Do not charge alkaline or non
rechargeable batteries.
BELT CLIP
To attach the belt clip:
Slide the belt clip until it snaps into place.
To remove the belt clip:
To remove the belt clip. Press and hold
belt clip locker, slide the belt clip at the
same time until released.
LOW BATTERY ALERT
If the Battery level becomes low, the battery
indicator icon on the LCD begins flashing..
When the batteries in the unit are low, the unit will go into a
Battery Low Mode. The Transmit Mode is disabled. Replace the
alkaline batteries immediately or if you are using the NiMH
Battery pack, place the Radio on the charge cradle to recharge
(supplied with
UHO41P
continue using the radio.
UH041 Manual.prn
UH041 Manual - UT01912AZ
Monday, October 13, 2003 6:52:22 PM
charge 2
, optional accessory for
3
Power Point
Belt Clip Locker
to
UH041)