Adjusting The Picture Settings - Vizio D24h-G9 User Manual

ADJUSTING THE PICTURE SETTINGS

Your TV can be adjusted to suit your preferences and viewing conditions.
If you save changes to the settings for a picture mode, an asterisk
appears after its name (see
To adjust the picture settings:
Press the Menu button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight Picture and press
OK. The Picture menu is displayed.
3. Use the buttons on the remote to highlight
then use the buttons to change the picture mode:
• d mode sets the picture settings to the
default settings.
• mode sets the picture settings to values ideal for
watching TV in a brightly-lit room.
• mode sets the picture settings to values ideal for
watching TV in a dark room.
• mode sets the picture settings to values that produce a
brighter, more vivid picture.
• Game mode reduces throughput delays and optimizes the picture
settings for displaying game console output.
• mode optimizes the picture settings for displaying
computer output.
4. To manually change each of the picture settings, use the
buttons on the remote to highlight that picture
setting, then use the
setting:
• - Adjusts the LED
).
brilliance of the picture. Backlight
cannot be adjusted when starting
from some picture modes.
• - Adjusts the black
level of the picture. When this
setting is too low, the picture may
be too dark to distinguish details.
When this setting is too high,
the picture may appear faded or
,
washed out.
• - Adjusts the white
level of the picture. When this
setting is too low, the picture may
appear dark. When this setting is
too high, the picture may appear
faded or washed out. If the setting
is too high or too low, detail may
or bright areas of the picture.
• - Adjusts the intensity of the
picture colors.
• - Adjusts the hue of the picture. This setting is useful in
orange, reduce the level of color before adjusting tint.
• - Adjusts the edge sharpness of picture elements.
however, it will not produce detail that does not otherwise exist.
button on the remote.
To adjust more picture settings:
buttons to adjust the
From the PICTURE menu, use the
buttons to highlight
, and then press OK.
2. Use the
the setting you wish to adjust, then
Picture
Back
press the
change the setting:
Picture Mode Calibrated
Backlight 90 •
the Color Temperature.
Brightness 50
•
Contrast 50
average brightness of the picture
Color 50
to compensate for large areas of
Tint 0
Sharpness 20 or High.
More Picture
•
Picture Mode Edit will improve the contrast ratio of
the picture by adjusting backlight
Color Calibration
on content.
•
High.
-
•
when gaming.
•
or .
•
YCbCr, but PC uses RGB. Available for HDMI input only.
• Gamma
values for bright room conditions, and higher values when it's dark.
3.
button on the remote.
* Not applicable to D24h-G9
**Applicable models: D50x-G9, V505-G9, V405-G9 and V655-G9
More Picture
Back
Color Temperature Normal
Black Detail* Off
buttons to highlight
Backlight Control On
Reduce Noise
buttons to
Game Low Latency Off
Film Mode* On
Adjusting
Color Space** Auto
Gamma 2.2
Adjusts the
, , ,
- When ON, it
Diminishes artifacts in the image caused by
, , , or
Reduces pixelation and distortion for mpeg
, , , or High.
to reduce video delay (lag)
3