Uniden TRU9585 Owner's Manual page 15

Place the mounting
slots over the pins
on the wall plate.
Removing the wall-mount bracket
At the bottom of the base, lift up on
the release latch between the two
bottom tabs and push the bracket up.
Note:. Mounting.the.phone.directly.on.the.wall
•
•
•
•
Release latch
4
Wall plate
(To AC outlet)
Be.sure.the.wall.is.capable.of.supporting.the.weight.
of.the.phone,.and.use.the.proper.type.of.anchoring.
device.for.the.wall.material.
Insert.two.#0.screws.(minimum.length.of..
inches,.not.supplied).into.the.wall,.3.
apart...
Leave.the.screw.heads. 
allow.room.for.mounting.the.phone..
Align.the.mounting.slots.over.the.screws.and.slide.
the.base.down.into.place.as.shown.above.
Slide the base
down to lock it
into place.
3 / .
8
5
/ .inches.
6
/ .inch.away.from.the.wall.to.
8