Table of Contents
Advertisement
DESCRIPTION
Instruments and Controls
A variety of special equipment is available for use with the Farmall Cub.
The instruc-
tions for operating and maintaining the special equipment have been included in the in-
structions for operating and maintaining the tractor.
Disregard the instructions for special
equipment not on your tractor.
lllust. 4
Location of controls.
Brake Pedals
These pedals are used to stop the tractor, to hold
the tractor in a stationary position, or to assist in
making sharp turns as outlined below:
To stop the tractor, latch the pedals to-
gether so both brakes will operate simul-
taneously when the pedals are pressed down.
To hold the tractor in a stationary posi-
tion, latch the pedals together, depress and
lock them in this depressed position by
using the brake pedal lock.
To assist in making· a sharp turn, the
pedals must be operated individually, de-
4
pressing the pedal on the side toward which
the turn is to be made.
The brake pedal latch
{located behind the left-
hand brake pedal) is used to latch Qoth brake pedals
together, causing the brakes to operate simultane-
ously.
The brake pedal lock
(Illusts. 4 and 48B) is used
to lock the brake pedals in the depressed position.
This prevents the tractor from !]loving.
Clutch Pedal
This pedal, when depressed all the way, dis-
engages the engine from the transmission.
Hide quick links:
Advertisement
Table of Contents
