Kenmore 596.53462302 Use & Care Manual page 21

Electronic control features,
DISPLAY
ON/OFF
CHANGE
MAX COOL
This function causes the fresh
food temperature to drop to the
minimum refrigerator temperature setting
available. This setting remains in effect
for approximately 10 hours.
To activate and deactivate Max Cool:
➢ To activate, press the MAX COOL
button. The green light above the
button will indicate active status.
➢ To deactivate, press the MAX COOL
button. The green light above the
button will go out.
NOTE: The temperature setting cannot
be changed if Max Cool or Max Freeze
setting is active.
MAX FREEZE
This function causes the freezer
temperature to drop to the minimum
freezer temperature setting available.
This setting remains in effect for
approximately 24 hours.
To activate and deactivate Max
Freeze:
➢ To activate, press the MAX FREEZE
button. The green light above the
button will indicate active status.
➢ To deactivate, press the MAX
FREEZE button. The green light
above the button will go out.
NOTE: The temperature setting cannot
be changed if Max Cool or Max Freeze
setting is active.
cont.
OFF
CONFIRM MAX
TEMP SET
FREEZE
SETTINGS
ON
DISPENSER
FILTER
LOCK
GOOD
WATER
UNLOCK
DISPLAY ON/OFF
MAX
COOL
The Display On/Off switch
controls power to the LED display.
To activate and deactivate display:
➢ To activate, press the DISPLAY
ON/OFF button. The display will light.
➢ To deactivate, press the DISPLAY
ON/OFF button. The display will go
out.
VACATION MODE
This key, if enabled, causes less
frequent defrost cycles. This conserves
energy.
To activate and deactivate Vacation
Mode:
➢ To activate, press the VACATION
MAX
FREEZE
MODE button. The green light above
the button will indicate active status.
➢ To deactivate, press the VACATION
MODE button, or open either
refrigerator door.
MAX
TEMP SET
COOL
LIGHT
CRUSH CUBE
ON/OFF
DISPLAY
ON/OFF
VACATION
MODE
VACATION ALARM
MODE OFF
LIGHT
SENSOR
ALARM OFF
This key is used to turn the HI
TEMP Warning Indicator and audio
alarm, as well as the OPEN DOOR
audio alarm off. This will also deactivate
alarms presently in progress.
To turn the alarm off:
➢ Press the ALARM OFF button.
ALARM
OFF
21