In memory dialing
operation, you must press
a key within 20 seconds or
the phone will return to
standby. If you return the
handset in the cradle, the
phone will return to
standby, too.
Storing phone numbers and names
Memory Dialing allows you to dial a number using just a few key
strokes. You can store up to 20 phone numbers in the memory.
del
#/
1
redial/p
/tone/
0
*
4
Use
,
, or
•
ª
cannot exceed 13 characters.
• Use
and
•
contains upper and lower case letters and various
characters.
#/
• Use
1
and
desired location.
• Use
del
to delete characters as needed.
1
Press and hold
"Memory Store" is displayed.
Memory Store
01
02
2
Use
and
ª
number (01 - 20) to select the
memory location where you would
like to store the number.
3
select
Press
The following screen appears and a
cursor flashes indicating that the
display is ready for the name to be
entered.
Store Name
If this screen appears, the selected
memory location is already stored.
Then you must either change the
entry in this location, clear the
location, or select "Go Back" to
choose another location.
Edit Memory07
Delete Memory07
Go Back
to enter the name. The name
del
to scroll through the character menu. It
ª
/tone/
0
to move the cursor to the
*
memory
until
or enter a two-digit
•
.
17