Uniden EXT1160 Owner's Manual page 11

C Connect the base unit
.
1) Connect the AC adapter to the DC IN 9V
jack and to a standard 120V AC wall outlet.
2) Set the base on a desk or tabletop, and
place the handset on the base unit as
shown. Remove the beltclip, if attached,
for face up charging. (See "Mounting the
Base Unit on a Wall", on page 11.)
3) Raise the antenna to a vertical position.
4) Make sure that the voice messages/status LED
indicator lights. If the LED does not light, check to
see that the AC adapter is plugged in and that the
handset makes good contact with the base charging
contacts.
•Use only the supplied AD-310 AC adapter. Do not use
any other AC adapter.
•Connect the AC adapter to a continuous power supply.
•Place the base unit close to the AC outlet so that you
can unplug the AC adapter easily.
• The handset can be
placed face up or face
down in the base for
charging.
• You have to remove
the beltclip, if attached
for face up charging.
Place the power cord so
that it does not create
a trip hazard or where
it could become chafed
and create a fire or
electrical hazard.
G E T T I N G S T A R T E D [ 9 ]