If you select a memory
location that does not
have a stored number, the
handset will beep rapidly
and the phone will not
dial.
If you press
LongDst
instead of
, the
talk
LDM will be activated.
(See page 14 for details.)
Storing mixed tone/pulse number
If your have selected pulse dialing, you can store a mixed
tone/pulse number (up to 20 digits) for memory dialing.
Dialing a stored number
talk
mem
1
Remove the handset from the base
and press
mem
LED flashes and you hear a beep.
2
Enter the number to be dialed in
pulse mode.
3
Press the
/tone
*
handset. The
*
as one digit and also enters a pause.
4
New enter the number(s) to be dialed
in tone mode.
5
Press
and a number (0-9) on
mem
the keypad for the memory location
you wish to use. You will hear a long
beep and the talk / batt LED goes out.
To dial a phone number stored in
memory, press
talk
and the memory location (0-9). Your
phone will dial the stored number.
. The talk / batt
button on the
/tone
button counts
, then press
mem
16