Parameter View - A.O. Smith CAHP-MC-38 Installation, Operation And Maintenance Instructions

6.6. Parameter View

Select the PARAMETER REVIEW on the main menu to enter the parameter review interface.
USER SETTING
MAINTENANCE SETTING
PARAMETER VIEW
HEAT PUMPS STATUS
HEAT PUMPS CONFIG
AUX HEATER OUT TEMP
HP TARGET TEMP
AVR WATER IN TEMP
AVR WATER OUT TEMP
CIR PUMP STATUS
Move to specific menu items by pressing the UP/DOWN button.
Menu Description
Menu Item
AUX HEATER OUT TEMP
HP TARGET TEMP
AVR WATER IN TEMP
AVR WATER OUT TEMP
CIR PUMP STATUS
USER PUMP STATUS
AUX PUMP STATUS
HISTORY FAULT(1)
HISTORY FAULT(2)
HISTORY FAULT(3)
HISTORY FAULT(4)
Note: Press the "BACK" button to return to the main page of the interface and press the "HELP" button to enter the menu
for help.
MAIN MENU
SELECT BACK
Picture 6.11 Main Menu
PARAMETER VIEW
BACK
Picture 6.12 Parameter View Interface
Parameter View
AUX HEATER TEMP ADJ displays the actual outlet water temperature from the
auxillary heater.
HP TARGET TEMP displays the target temperature for the heat pump operation. It
will display "NO" if the heat pump is in other status than "Heating".
AVR WATER IN TEMP displays the average inlet water temperature for all the heat
pump units.
AVR WATER OUT TEMP displays the average outlet water temperature for all the
heat pump units.
CIR PUMP STATUS displays the status of the circulation pump.
USER PUMP STATUS displays the status of the user pump.
AUX PUMP STATUS displays the status of the auxillary heater pump.
HISTORY FAULT(1) displays the most recent fault information.
HISTORY FAULT(2) displays the 2
HISTORY FAULT(2) displays the 3
HISTORY FAULT(2) displays the eldest fault information.
HELP
70℃
50℃
20℃
25℃
ON
HELP
Description
nd
newest fault information.
rd
newest fault information.