Using Your Existing Internet Service Provider (Isp) - Uniden EP200 Owner's Manual

Setup

Using Your Existing Internet Service Provider (ISP)

(From the Home Screen press the Function Keys under
Note: For more information on how to set up specific service providers, see the
Uniden Web Page at HTTP://WWW.UNIDEN.COM.
This information is normally provided by your Internet Service Provider. You will
also need to know the way your ISP has you login on a text screen. The text
screen login information will be used later when you enter your Dial-Up Script on
page 29. The Dial-Up Script is a set of commands that will tell the modem in the
Email phone how to dial and login to your service provider. Before you start this
procedure, be sure to have the following information ready:
1. Enter your Email phone User name. For example, jsmith.
2. Press
3. Enter your Email phone Password. For example, password.
4. Press
5. Enter the SMTP (Simple Mail Transfer Protocol) Host Name. For example,
pop.airmail.net.
6. Press
7. Enter the POP3 (Post Office Protocol) Host Name. For example, mail.airmail.net.
8. Press
9. Enter your Email phone address. For example, jsmith@airmail.net. This is used
as your return address.
10.Press
11.The beginning of your server name is already displayed; enter the rest of your
username.
22
q
Your Email phone user name
q
Your Email phone password
q
Your SMTP Host Name
q
Your POP3 Host Name
q
Your Email phone address
q
Your Server Name, if applicable
q
Your Server Password, if applicable
q
Local Access Number
q
PAP Server Name and Password, if applicable
q
CHAP Server Name and Password, if applicable
q
DNS Primary Address and Secondary Address
q
Server Domain Name
B
on the keyboard.
B
on the keyboard.
B
on the keyboard.
B
on the keyboard.
B
on the keyboard.
s i
, then , and
service
.)