Updating the Firmware
1.
Connect your headphones to your device before updating.
2.
From the Device tab, click the three dots.
3.
Follow the step by step instructions in the app.
4.
The progress bar will display update percentage progress. A notification will appear when download is complete.
5.
If update fails on the first attempt, check the list below for power and proximity requirements and repeat the process.
Tip: Follow these guidelines for the most reliable update.
•
Ensure the network connection is stable during the update. Do not turn off your device until the update is complete.
•
Using the headphones or phone while downloading may slow the download process.
•
Headphone battery should be charged to a minimum of 30% and phone battery should be at a minimum of 50%.
•
Headphones should be powered on and located near the device.
•
Approximate download time for headphones is 10 minutes. Approximate download time for earphones is 30 minutes.
Cable connections
The headphones can also use two different cables to access audio instead of using the wireless feature:
•
USB-C:
◦
Charge the headphones
◦
Connect to digital audio
•
3.5 mm audio cable: Connect to an analog audio port
Perawatan dan Pemeliharaan
Untuk membersihkan headphone gunakan kain basah yang lembut
HATI-HATI: Jangan gunakan pembersih yang mengandung pelarut. Jauhkan benda-benda cair dan asing dari bukaan driver.
Penyimpanan
Store headphones in protective case when not in use.
Shure Incorporated
10/12