Answering An Intercom Page; Room/Baby Monitor - Uniden DSS3450 Owner's Manual

Answering an Intercom Page

When the intercom page tone sounds, the display shows the ID of the
station that is paging.
From the handset, press [ /flash] or
on, the handset automatically answers the page when you remove the
handset from the cradle. If Any Key Answer is on, press any key of the
twelve-key pad.
From the base, press [int'com/xfer]
To hang up an intercom page from the handset, press
To hang up an intercom page from the base, press

Room/Baby Monitor

This feature allows you to monitor sounds in another room. Place a handset or the base in the room you wish to
monitor; it will function as a microphone. Another handset can be set to function as a remote speaker, allowing you
to monitor sounds in the room.
1. Press [menu/clear] and enter the ROOM MONITOR menu.
TO ROOM MONITOR appears.
2. Select the station you want to monitor by using
3. Press [select/ ] . ROOM MONITOR appears, and you hear
sounds in the room where the station is installed.
4. To turn off the Room Monitor, press
the handset to the cradle.
Notes:
!
This feature only works when both handsets are within the range of
the base.
!
If the party is out of range, UNAVAILABLE appears in the display, and
the operation is canceled.
!
While a pair of handsets is in Room/Baby Monitoring, they cannot be used
to make or receive calls. Other handsets can still make and receive calls.
[xfer/intercom] . If AutoTalk is
, or [speaker] .
[ ] .
[int'com/xfer] .
[ ] or [ ] .
[ ] or return
[44]