Connect The Charger - Uniden DECT4096 Series User Manual

4. Place the cover over the battery
compartment and slide it up into place.

Connect the charger

1. Connect a charger AC adapter to each
charger's
AC IN 8V
plug into the notch as shown. (These
adapters might already be
connected.)
2. Plug the other end of the adapter into
a standard 120V AC power outlet.
3. Place each handset in a charger with
the display facing forward. The
light should turn on.
CHArGE
Charge all handsets completely (about 15 hours)
before using them.
Test the connection
Pick up each handset and press
and the display should say Talk. (Press
If you can't get a dial tone or the handset display says Unavailable, try
moving the handset closer to the base or resetting it (see page 44).
jack and set the
If... Try...
-
the reseating the handset.
CHArGE
light doesn't
-
checking the AC adapter connection.
turn on
-
seeing if the outlet is controlled by a wall
switch.
. You should hear a dial tone,
TaLk
to hang up.)
eND
V V
A C I N 8 A C I N 8