Test The Connection - Uniden DECT4096 Series User Manual

4. Place the mounting slots
over the pins
on the wall
plate, and
slide the base
down to lock it
into place.
Test the
Connection
Pick up the corded
handset from the
base. The phone should pick up line 1 automatically and change the
display to show Talk
get a dial tone, make a test call.
If...
the display says
or you don't hear a dial tone
you keep hearing a dial tone setting line 1 to pulse dialing (see page 4).
there's a lot of noise or static
Test Line 2
Once you can make calls on line 1, make a
test call on the second line. Pick up the
corded handset and press the unmarked
key under
LINe2
tone and the display should show Talk
If...
the display says
or you don't hear a dial tone
you keep hearing a dial tone setting line 2 to pulse dialing (see page 4).
(To telephone jack (To telephone jack
for second line.) for second line.)
, and you should hear a dial tone. When you
Check
. You should hear a dial
Check
Try...
checking the connection between the
base and the phone jack: make sure the
cord is connected to
see page 43 for tips on avoiding
interference.
.
Try...
checking the connection between the
base and the phone jack: if you have a
separate jack for each line, make sure the
cord is connected to
TEl lINE 1/2
SUN 12:00A SUN 12:00A
12/31/08 12/31/08
LINE1 LINE1 MENU MENU
TEl lINE 2
DE SK DE SK
W AL L W AL L
WA LL WA LL
.
0 0
0 0
LINE2 LINE2
.