Quick Reference Chart - Uniden DS73 Owner's Manual

QUICK REFERENCE CHART

If your phone is not performing to your expectations, please try these simple steps
first before calling Uniden customer service.
PROBLEM
The charge light
won't come on
when the handset
is placed on
the base.
The audio sounds
weak and/or
scratchy
Can't make or
receive calls.
The handset
doesn't ring or
receive a page.
SUGGESTION
Make sure the AC adaptor is plugged into the base and
wall outlet.
Make sure the handset is properly seated in base.
(Face down if the belt clip is installed)
Make sure the charging contacts on the handset and base
are clean.
Make sure that the base antenna is in a vertical position.
Move the handset and/or base to a different location away
from metal objects or appliances and try again.
Check both ends of the base telephone
line cord.
Make sure the AC adaptor is plugged into the base and
wall outlet.
Disconnect the AC adaptor for a few minutes, then
reconnect it.
Place the handset back on the charging cradle for a few
seconds. The talk LED blinks momentarily indicating
that the phone has been reset.
The Ni-MH battery pack may be weak. Charge the battery
for 15-20 hours.
Be sure the antenna is in a vertical position.
The handset may be too far away from the base. Place the
base away from appliances or metal objects.
Place the handset back on the charging cradle for a few
seconds. The in use LED lights indicating that the
phone has been reset.
You may have exceeded the REN limit. See MORE THAN
ONE PHONE on page 5.
27