Preparing for installation
This section contains the following information that will help you prepare for the computer
installation:
Safety precautions
●
System precautions
●
Required tools
●
Electrical specifications
●
Physical specifications
●
Service access specifications
●
!
!
Important:
Safety precautions
For your protection, observe the following safety precautions when setting up your
equipment:
Follow all cautions, warnings, and instructions that are marked on the equipment.
●
Never push objects of any type through openings in the equipment. Objects might touch
●
dangerous voltage points or short out components, resulting in fire or an electric shock.
When moving the computer, be careful not to unplug any power or data cables.
●
Refer servicing of equipment to qualified personnel.
●
To protect both yourself and the equipment, observe the following precautions.
●
Wrist or
foot strap
Cover
panels
Card slot
filler
panels
on page 3
on page 4
on page 5
on page 5
on page 6
Important:
Important:
DO NOT install any internal hardware shipped with the Sun machine during
customer site assembly and power up. Any internal hardware shipped will
be installed under the direction of an Avaya CMS Provisioning Engineer at
the scheduled provisioning appointment time.
Item
Problem
ESD
System
damage and
overheating
System
damage and
overheating
on page 6
Wear a conductive wrist strap or foot strap
when handling printed circuit boards.
Reinstall all cabinet cover panels after you
perform any service work on the system.
Ensure that a filler panel is installed on all
empty card slots.
Precaution
May 2005
3