Using Your Phone; Working With Two Lines - Uniden DCX400 User Manual

Working with Two Lines

When performing common tasks, you can let the station use the
primary line, or you can manually choose a particular line for each
task. Using the primary line makes common tasks much simpler, but
you will need to assign a primary line to each station (see below).
If you want to...
make a call: Dial the number, then
- with the primary line Press
- by choosing a line
answer a call
When a call comes in, the soft keys blink to tell you which line is ringing.
- with the primary line Press
- by choosing a line
hang up
switch between the
speaker and earpiece
put a call on hold
switch lines during a
call (automatic hold)
mute the microphone
during a call
mute the ringer for
this call only
* On the handset, press
Assigning a primary line
You can assign a primary line to each station; the station connects
to its primary line whenever it goes off hook (that is, when you press
or
TALK/FLASH SPEAKER
20

Using Your Phone

From a handset
TALK/FLASH
Press LINE1 or LINE2
TALK/FLASH
Press the soft key for the line you want to answer.*
Press or return the handset to
END
the cradle.
Press .
SPEAKER
Press
INTERCOM/HOLD
you the line is on hold. To return to the call, press the
soft key ( LINE1 or
Press the soft key for the other line; the current call
is automatically put on hold (see above). To return to
the call, press the soft key for the holding line.
Press MUTE .
Press again to turn the microphone back on.
While the phone is ringing,
press .
END
to switch to the speakerphone.
SPEAKER
). Whenever you want, you can bypass the
From a handset From the base
speakerphone speakerphone
. Press .
SPEAKER
.*
. Press .
SPEAKER
Press
Not available
; the soft key blinks to remind
LINE2 ) for the holding line.
Press
press
.
SPEAKER
.
MUTE/EXIT
.
MUTE/EXIT