Accessing Voicemail; Maintenance; Battery Life; Low Battery Alert - Uniden DCX150 Series Owner's Manual

Accessing Voicemail

If your base doesn't have an answering system and you
subscribe to a voice mail service, you can program your handset
to automatically dial the access number.
) Press MENU/SELECT.
) Move the cursor to Handset Setup and press
MENU/SELECT.
3) Move the cursor to Edit Voice Mail and press
MENU/SELECT.
4) Enter your access number (up to twenty digits). If you need
the phone to wait before sending the next digits, press
REDIAL/PAUSE to insert a two-second pause. For a longer
pause, press REDIAL/PAUSE multiple times. Each pause
counts as one digit.
Press MENU/SELECT when you are finished.
5)
Once you program your access number, press
your voice mail service.

Maintenance

Battery Life

With average use, your battery provides more than ten hours
of talk time and approximately seven days of standby time.
For optimum performance, be sure to return the handset to the
cradle after each call. If the handset is left off of the cradle, the
actual talk time duration will be reduced respective to the amount
of time the handset is off the cradle.
Note: Do not place the power cord where it creates a trip hazard or
where it could become chafed and create a fire or electrical
hazard.

Low Battery Alert

When the battery pack is very low, the display shows Low
Battery - Charge Handset and the empty battery icon. If the
phone is in standby, none of the keys will operate. If you are on
a call, complete your conversation as quickly as possible, and
return the handset to the cradle.
8
/MUTE to dial