Advertisement
1. Lean the headboard against a wall or with the aid of another person, loosen the 4 allen
bolts and lift the side panel into place by sliding the corner bracket across and down onto
the bolts as shown. Ensure washers sit in front of the bracket.
2. Repeat with the footboard.
3. Using the allen key provided, tighten all 8 bolts evenly. DO NOT OVER TIGHTEN
Step 4
1. Take bracket 'A' and slot into the notched steel plates on the head/footboard and side
panels by pushing in and down as shown. Select your preferred mattress height using the
corresponding slot and ensure that the 4 brackets on the side rails are positioned at the
same height. The bracket on the head and foot boards MUST be positioned 1 SLOT LOWER
than the brackets on the side rails.
Step 5
A
A
A
A
4
Advertisement
