Lenovo ThinkSystem SR645 Setup Manual page 131

Step 4. Install the M.2 adapter onto the chassis.
Figure 49. M.2 adapter installation
a. Align the notch of the M.2 adapter with the pin on the chassis, and then place down the M.2
adapter.
b. Tighten the screw to secure the M.2 adapter.
Step 5. Install the M.2 drive on the M.2 adapter.
Figure 50. M.2 drive installation
a. Insert the M.2 drive at an angle of approximately 30 degrees into the connector.
b. Rotate the M.2 drive down until the notch
c. Slide the retainer forward (toward the connector) to secure the M.2 drive into place.
After you finish
catches on the lip of the retainer
1
Chapter 4
.
2
.
Server hardware setup
127