Using Your Headset; Put Your Headset On - Uniden BT230 User Manual

If the headset loses the connection for more than 0 seconds (e.g., if your phone is out of range),
►
it goes into idle mode. To manually reconnect, press MFB once. If the headset comes back in
range in less than 0 seconds, it will automatically reconnect without pressing MFB.

UsinG YoUr HeadseT

Turning the
headset on
Turning the
headset off

put your headset on

Insert the ear cushion, then wrap
the earhook behind your ear.
Everyone's ear has a sweet
spot, a particular angle of
the speaker where the audio
To turn the headset on, slide the power button to the ON position. The blue
LED flashes and you hear the turn-on melody (about  seconds).
Slide the power button to its original position.