Table of Contents
Advertisement
If...
The headset paired with
my phone, but I can't hear
anything through it.
The headset keeps beeping,
and I don't know why.
I can hear the caller, but the
audio is very weak or soft.
reset the Headset
NOTE: Before resetting the headset, make sure the headset is not connected to any mobile
phones (e. g. headset is in connectable mode).
Press and hold MFB + Down for seconds. The LED flashes 5 times and the
headset beeps. Once the headset is reset, all the mobile phone links are deleted.
General InformatIon
•
You cannot use the headset while it is recharging.
•
Bluetooth wireless devices have a maximum range of 0 feet (10 m); the actual range varies depending on
current conditions (obstacles, battery power, interference, etc.).
1
Try...
•
Making sure the call connected and is still active.
•
Making sure the phone transferred the call to the headset. Press and hold
MFB for two seconds to transfer the call.
•
Seeing if the battery is getting low. If the LED is blinking red, charge the
battery.
•
Turning the speaker volume up.
•
Moving closer to your phone (if you aren't carrying it).
•
Keeping the battery fully charged; As the battery starts to run out, the speaker
gets softer.
Advertisement
Table of Contents
