TP-Link Archer A6 User Manual page 90

2 ) Click Save.
Note: Log in to the web management page again if the IP address of the router is altered.
3. Survey the SSID to be bridged:
1 ) Go to Advanced
WDS section, click
2 ) Click Survey, locate the root router's SSID and click
TP-Link_4F98 as example).
3 ) If the root router has wireless password, you should enter the wireless password
of the root router.
4 ) Click Save.
4. Disable DHCP:
1 ) Go to Network
2 ) Deselect Enable DHCP Server
Now you can go to
WDS status is Run, it means WDS bridging is successfully built.
Q5. What should I do if I cannot access the internet even though the
configuration is finished?
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced
> System Tools
Enable WDS
> DHCP Server.
Advanced > Status
> Status to check internet status:
> System Parameters
Bridging.
and click Save.
> Wireless to check the WDS status. When the
and focus on the 2.4GHz
Choose (Here we take
86