Test The Network Connectivity - TP-Link Archer A6 User Manual

Chapter 13
4. You can enable Night Mode
be off during this period.
5. Click Save.

13. 3. Test the Network Connectivity

Diagnostics is used to test the connectivity between the router and the host or other
network devices.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
3. Enter the information with the help of page tips:
1 ) Choose Ping
• Ping is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
• Traceroute
the tested host, and measure transit delays of packets across an Internet
Protocol network.
if needed, and set a time period, and then the LEDs will
System Tools > Diagnostics.
or Traceroute as the diagnostic tool to test the connectivity;
is used to display the route (path) your router has passed to reach
Manage the Router
70