Error Messages - Sony PXW-X70 Firmware Update

Error messages

When problems occur during FTP transfer
and streaming distribution, the following
error messages are displayed. Take
measures depending on the displayed
messages.
No registered access point.
No access point is registered. Register
an access point in [ACCESS POINT
SET] of the
menu.
Cannot find connectable access point.
Set the access point setting.
Cannot find a connectable access point.
Check the access point settings in
[ACCESS POINT SET] of the
(NETWORK SET) menu.
Connection to the access point failed.
Please input your password again.
Failed to connect to the access point.
Input your password again.
Connection with an access point
disconnected.
Check the connection condition.
The connection with an access point
was disconnected. Check the
connection status.
No response from the access point.
No response from the access point.
Check the connection with the access
point.
GB
14
(NETWORK SET)
Failed to acquire an IP address.
Change the IP address setting.
Cannot acquire an IP address. If
connected to a network via wireless
LAN, set the IP address manually in
[ACCESS POINT SET] of the
(NETWORK SET) menu. If connected
to a network via wired LAN, set the IP
address manually in [WIRED LAN
SET] of the
menu.
Failed to acquire an IP address.
Check the DNS server setting.
Cannot acquire an IP address.
Check the DNS server setting.
Network error occurred.
A Wi-Fi communication error has
occurred.
Check the USB device connection.
Check the USB device connection.
Cannot use this USB device.
Connect a proper USB device.
Check the LAN cable connection.
Cannot connect to the network. Check
the LAN cable connection.
Failed to connect to an FTP server.
Check the FTP server settings.
Check the registered FTP server
settings.
Failed to connect to an FTP server.
Failed to connect to an FTP server for a
reason such as the FTP server could not
be found.
Could not verify the certificate.
The certificate of the FTP server could
not be verified.
(NETWORK SET)