Before You Call - Kenmore 253.17502 Series Use & Care Manual

Before You Call

TROUBLESHOOTING
GUIDE
CONCERN
FREEZER DOES NOT RUN
Freezer does not run.
Freezer runs too much
or too long.
Interior Freezer tem-
perature is too cold.
Interior Freezer tem-
perature is too warm.
Freezer external surface
temperature is warm.
Before calling for service, review this list. It may save you time and
expense. This list includes common occurrences that are not the result of
defective workmanship or materials in this appliance.
POTENTIAL CAUSE
• Freezer is plugged into
a circuit that has a
ground fault interrupt.
• Temperature control is
in the OFF position.
• Freezer may not be
plugged in or plug
may be loose.
• House fuse blown or
tripped circuit breaker.
• Power outage.
• Room or outside
weather is hot.
• Freezer has recently
been disconnected
for a period of time.
• Large amounts of
warm or hot food have
been stored recently.
• Lid is opened too fre-
quently or too long.
• Lid may be
slightly open.
• Temperature Control
is set too low.
• Freezer gasket is
dirty, worn, cracked,
or poorly fitted.
• Temperature Control
is set too low.
• Temperature Control
is set too warm.
• Lid is kept open too
long or is opened
too frequently.
• Lid may not be seat-
ing properly.
• Large amounts of warm
or hot food may have
been stored recently.
• Freezer has recently
been disconnected
for a period of time.
• The external freezer
walls can be as much
as 30°F warmer than
room temperature.
COMMON SOLUTION
• Use another circuit. If you are unsure about the
outlet, have it checked by a certified electrician.
• See Setting the Temperature Control Section.
• Ensure plug is tightly pushed into outlet.
• Check house fuse or circuit breaker.
• Check house lights. Call local Electric Company.
• It's normal for the freezer to work harder
under these conditions.
• It takes 4 hours for the freezer to cool
down completely.
• Warm food will cause freezer to run more
until the desired temperature is reached.
• Warm air entering the freezer causes it to run
more. Open lid less often.
• See "LID PROBLEMS" in Before You Call Section.
• Turn control knob to a warmer setting. Allow
several hours for the temperature to stabilize.
• Clean or change gasket. Leaks in the lid seal
will cause freezer to run longer in order to
maintain desired temperature.
• Turn the control to a warmer setting. Allow
several hours for the temperature to stabilize.
• Turn control to a colder setting. Allow several
hours for the temperature to stabilize.
• Warm air enters the freezer every time the lid
is opened. Open the lid less often.
• See "LID PROBLEMS" in Before You
Call Section.
• Wait until the freezer has had a chance to
reach its selected temperature.
• Freezer requires 4 hours to cool down completely.
• This is normal while the compressor works to
transfer heat from inside the freezer cabinet.
10