Table of Contents
Advertisement
XL-12000S
MANAGED, HIGH-SPEED NETWORK MODEM USER GUIDE
Figure 8.3 Upgrade Software Screen
Table 8.3 Specific field information for the Upgrade Software screen.
FIELD
Running, Boot = >
Image 1:
Image 2:
Choose image to Boot (1/2): Choose Image 1 or Image 2. Select the image that will be
Enable Transfer to Image 2: Enables image transferring. Select "Y" to enable and "N"
Detailed Steps for Running Tutxlutil
Tutxlutil is the program used to send a new image to an XL-12000S.
Software upgrades are available from Tut Systems. Tutxlutil must
be run on a PC that has network connectivity to the modem. The
modem will accept an image from either the 10Base-T port or the
DSL port, so both local and remote modems may be upgraded. If the
PC is not on the same subnet as the XL-12000S, the Default
Gateway field on the XL-12000S may need to be set to an
appropriate router.
46
TUT SYSTEMS
DESCRIPTION
Displays the currently running image (either 1 or 2).
Displays the software release number of Image #1.
Displays the software release number of Image #2 or if
empty, it will be blank.
used on the next boot of the modem.
to disable.
Back to Table of Contents
8.0 ADVANCED MODEM FEATURES
Advertisement
Table of Contents
