Related Manuals for Neilsen CT2955
Summary of Contents for Neilsen CT2955
- Page 1 1500LB ATV TRAILER CT2955 Instruction & Assembly SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE...
-
Page 2: Ec Declaration Of Conformity
In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Product description: ATV TRAILER Model: CT2955 Applicable EC Directives: EC Machinery Directive 2006/42/EC 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K. -
Page 3: Component Parts
Component Parts... - Page 4 Assembly Instructions STEP 1: Attach the Connect Angle Steel 1. Attach the Connect Angle Steel to the Bottom Panel using Brazier Head Screw M8x16 and Nylon Lock Nut M8. STEP 2: Attach Tongue Support 1. Attach the Tongue Support to the Bottom Panel using Brazier Head Screw M8x16 and Nylon Lock Nut M8.
- Page 5 STEP 3: Attach the Wheel Axle Support 1. Attach Wheel Axle Supports to the bottom panel using Hex Bolt M10x20, Lock Washer Ø10 and Hex Nut M10. STEP 4: Attach Pin Bracket or Coupler 1. Attach the Pin Bracket to the Hitch Tongue using Round Head Screw M8x70, Flat Washer Ø8 and Nylon Lock Nut M8, then Insert the Round Pin to the hole of Pin Bracket and Hitch Tongue, secure with R Pin Ø3.
-
Page 6: Step 6: Attach The Wheels
STEP 5: Attach Wheel Axle 1. Center the Hitch Tongue Assembly in the Wheel Axle Support. 2. The rest of the hole on Wheel Axle Support using Hex Bolt M10x20, Flat Washer Ø10 and Hex Nut M10. Loosely them 3. Insert the Wheel Axle through the hole and slide it through both the Wheel Axle Support , Long Bushing and Hitch Tongue Assembly. -
Page 7: Step 8: Attach The Front Panel
STEP 7: Attach Side Panel 1. Attach the Left and Right Side Panel Assemblies to the Bottom Panel using Brazier Head Screw M6x12 and Nylon Lock Nut M6. STEP 8: Attach the Front Panel 1. Attach the Front Panel Assembly to the Bottom Panel using Brazier Head Screw M6x12 and Nylon Lock Nut M6. - Page 8 STEP 9: Attach Rear Frame Weldment 1. Connect the Rear Frame Weldment to the Bottom Panel using Brazier Head Screw M8x16 and Nylon Lock Nut M8. 2. Connect the Rear Frame Weldment to the Side Panel using Brazier Head Screw M6x12 and Nylon Lock Nut M6..
-
Page 9: Parts Drawing & Parts List
Parts Drawing & Parts List... - Page 10 PART PART DESCRIPTION DESCRIPTION Rear Panel Round Pin Rear Frame Weldment R Pin Ø3 Side Panel Brazier Head Screw M8x16 Front Panel Nylon Lock Nut M8 Bottom Panel Brazier Head Screw M6x12 Connect Angle Steel Nylon Lock Nut M6 Wheel Axle Support Hex Bolt M10x20 Tongue Support Lock Washer Ø10...