Miele F 32202 i Operating And Installation Instructions page 59

Securing the refrigeration appliance
in the niche
 Press the appliance against the side
of the housing unit on the hinge side.
 Screw the chipboard screws 
through the hinge plates at the top
and bottom to secure the appliance
to the housing unit.
 Push the loose fixing brackets against
the housing unit wall.
 Secure the fixing bracket  to the
housing unit side wall with the
screw .
Tip: Pre-drill the hole.
The appliance must not pull back
into the unit, as otherwise the gap of
42 mm will not be maintained all the
way round.
Using your thumb, push the protrud-
ing bracket towards the housing unit
wall whilst tightening the screws.
 Secure the fixing bracket  to the
housing unit side wall with the
screws .
Tip: Pre-drill the holes.
 Re-tighten screws  and .
Installation
59