Securing The Projector - BenQ LX710 User Manual

Below is the overview of the Basic OSD menu.
1
Brightness
Aspect Ratio
Auto
2 Picture Mode
Presentation
Volume
Enter
3
4
Likewise, when you wish to switch from the Basic OSD menu to the Advanced OSD menu, follow
the instructions below:
1. Go to Basic Menu > Menu Type.
2. Press OK and press / to select Advanced. Next time when you turn on the projector, you
may access the Advanced OSD menu by pressing MENU.

Securing the projector

Using a security cable lock
The projector has to be installed in a safe place to prevent theft. Otherwise, purchase a lock, such as
the Kensington lock, to secure the projector. You can locate an anti-theft lock slot on the rear side of
the projector. See item 23 on
A Kensington security cable lock is usually a combination of key(s) and the lock. Refer to the lock's
documentation for finding out how to use it.
Utilizing the password function
Setting a password
1. Go to Advanced Menu - Settings > Security Settings. Press OK. The Security Settings
page appears.
2. Highlight Change Password and press OK.
3. The four arrow keys ( ,
4 digits (1, 2, 3, 4). According to the password you desire
to set, press the arrow keys to enter six digits for the
password.
4. Confirm the new password by re-entering the new
password.
5. To activate the Power On Lock function, press / to
highlight Power On Lock and press OK. Press
select On. Input the password again.
Basic Menu
Light Mode
Dimming
Wireless LAN
Information
Menu Type
Exit
5
page 8.
, , ) respectively represent
Menu Type
1
Main menu
2
2
Current input
3
signal
6
Return
/ to
Press OK to enter
4
the menu.
Status
5
Press MENU to
6
exit.
Input New Password
Operation 25