Ducati Multistrada 1000DS 2004 Owner's Manual page 55

Fixed headlight fairing
Undo the six screws (1) securing the inner flange, on either
side of the headlight fairing, then pull the inner flange
upward and remove it (fig. 42).
1
Note
Be careful while removing the flange not to damage
the paint of the headlight fairing.
Undo the six screws (2) securing the fixed headlight fairing
to the headlight support (fig. 42a).
E
Remove the fixed headlight fairing.
When reassembling, tighten the four centre screws first
fig. 42
then the two on the sides.
Position the inner flange on the fixed headlight fairing,
make sure that the holes match.
Tighten the six screws (1), do not overtighten or the
inserts on the fixed headlight fairing might damage.
2
2
fig. 42a
https://www.motorcycle-manual.com/
55