Summary of Contents for SECO-LARM Enforcer EV-N6506-3W4Q
Page 1
EV-N6506-3W4Q IP Covert PIR Camera Web Admin User Manual Features: • H.265/MJPEG, Dual Stream IP Camera • ONVIF Profile S " 5MP Sony CMOS • 1440p Resolution • • D-WDR (Digital Wide Dynamic Range) • 2DNR (2D Digital Noise Reduction) •...
B/W modes • Digital Noise Reduction (DNR) Adjust for less interference on the screen in an area with low illumination DNR OFF DNR ON NOTE: All screen images in this manual are simulated. SECO-LARM U.S.A., Inc.
DeviceCfg: The DeviceCfg tab allows for full configuration of the IP camera's settings. LocalCfg: The LocalCfg tab allows for search and review of programmed alarms. Log Out: Press the Log out tab to log out completely of the IP camera interface. SECO-LARM U.S.A., Inc.
End – Select the ending video recording time to search Click Search to find video Log: Alarm Log: The alarm log records the camera’s alarm features. Displaying the alarm type, date, time, device, and channel. Operate Log: The Operate log records the camera’s login attempts. SECO-LARM U.S.A., Inc.
(spray painted or covered) Video Loss – Configure settings for loss of video Alarm Input – Configure alarm inputs Alarm Output – Configure alarm outputs Abnormal – Configure settings for abnormalities (IP conflicts, not enough storage) SECO-LARM U.S.A., Inc.
10. Send Email – Check to alert using email 11. FTP – Check to alert to FTP server 12. App Push – Check to force open application 13. Write log – Check to write to the log file 14. Click OK to save SECO-LARM U.S.A., Inc.
11. Send Email – Check to alert using email 12. FTP – Check to alert to FTP server 13. App Push – Check to force open application 14. Write log – Check to write to the log file 15. Click OK to save SECO-LARM U.S.A., Inc.
Network – Network configurations NetService – Services available GUI Display – OSD configurations PTZ Config – PTZ configurations RS232 – Serial port configurations Camera param. – Advanced camera configurations Setting – System – General 10. Click OK to save SECO-LARM U.S.A., Inc.
10. Static Configuration – Select profile between Baseline, Main Profile, and High profile. High profile takes up more space for the stream but the picture quality is better. 11. Smart Encoding – Select to use smart encoding on H.265+ SECO-LARM U.S.A., Inc.
RTSP – Real Time Streaming Protocol – used to stream camera video over network Cloud – Set up a third party cloud provider App Push – Force open an application 10. Serial Pass-Through – Configure RS232 settings SECO-LARM U.S.A., Inc.
Automatic and Manual. Day/Night mode: Star IR – Camera controls day and night settings automatically Full Color – Camera stays in color Black and White mode – Camera stays in black and white Smart Alert – Enable smart alert SECO-LARM U.S.A., Inc.
Auto-Reboot System – Select a time to auto reboot Auto-Delete Old Files – Select the number of days old a file needs to be in order to auto-delete Only Upgrade – Check to automatically check for upgrade Click OK to save SECO-LARM U.S.A., Inc.
Click OK to exit Setting – Advanced – Reboot: Click OK to reboot camera Setting – Advanced – Upgrade: Browse – Select firmware update file Upgrade – Click Upgrade to start the upgrade process Cancel – Click to exit SECO-LARM U.S.A., Inc.
Search – Fill in the start and end time and click search to display log Log Export – Export log to file Remove – Delete log OK – Click OK to exit Setting – Info – Version: OK – Click OK to exit SECO-LARM U.S.A., Inc.
Most Real-Time (Highest) to Most Fluency (Lowest) Automatically connect with the last monitoring channel – Check to enable Save local record as AVI – Check to save files as .avi Apply – Click Apply to save SECO-LARM U.S.A., Inc.
IMPORTANT: Users and installers of this product are responsible for ensuring this product complies with all national, state, and local laws and statutes related to monitoring and recording audio and video signals. SECO-LARM will not be held responsible for the use of this product in violation of any current laws or statutes.