Specifications; To Operate - Husky HUS-ZY Series Instruction Manual

6

SPECIFICATIONS

TO OPERATE

ZY all models manual 051118.indd 6
• This appliance is a wine storage appliance. It is not suitable for the storage of fresh
food or perishable drinks.
• It is intended strictly for domestic indoor use.
• The refrigerating circuit is leak-proof.
1. Control panel
2. Ventilation fan
3. Glass door
4. Door seal
• When the appliance has been positioned, adjust the feet to ensure the unit is stable. This
is essential to ensure quiet running and proper door opening/closing
• Ensure that the appliance is not connected to the power and clean the interior
compartment following the instructions on page 9
• Remove all transportation tapes
• CONNECT TO THE ELECTRICAL SOCKET BUT DO NOT SWITCH ON
THE POWER FOR AT LEAST 4 HOURS. The coolant within the product needs
time to settle after it has been transported and put in to position. Failure to do this will
affect the cooling performance of your appliance
• Follow the instructions below to adjust the thermostat to the required temperature.
• There may be an odour when you first switch on the appliance, it will disappear as it
starts to cool
• The following sounds are perfectly normal:
• Faint gurgling or bubbling sounds as the refrigerant is pumped to the cooling system
• A slight whirring or pulsating noise as the compressor is working
• A slight click as the thermostat cycles in and out and controls the compressor
• After the appliance has been unplugged, leave for 15 minutes before plugging it in again.
HUSKY INSTRUCTION MANUAL
5. Lock bracket 9.
6. Upper hinge 10. Shelf
7. Active carbon filter 11. Ventilation grille
8. Sensor 12. Adjustable feet
Sliding shelf runner
08/11/2018 16:39