Remove Hub Assembly - True Fitness 750E Service Manual

emoval & Replacement
Remove Hub Assemblies
Tools Required:
Elliptical Wrench (pn: 90361501)
Channel Lock Pliers
Flat Blade Screwdriver
Step 1.
Use elliptical wrench or pliers to
Remove large hex nuts holding hub
Assembly in place.
Step 2.
Remove retainer clip with flat-blade
Screwdriver
To remove wheel from frame, slip
Shaft through bearing.
Step 3.
Pull wheel and hub assembly out as
A unit. Bearings and axle cannot be
Field serviced.
Page 48
Copyright 2001 True Fitness Technology, Inc.
750E & 750EA
Step 1. Remove Large Hex Nut.
Step 2. Remove Clip.
Step 3. Pull Assembly Out.