Chapter 2: Assembly Instructions; Pre-Assembly Checklist - True Fitness PS300 Owner's Manual

Hide thumbs Also See for PS300:
Table of Contents

Advertisement

CHAPTER 2: ASSEMBLY INSTRUCTIONS

Read and understand all instructions and warnings prior to use.
Obtain a medical exam before beginning any exercise program. If at any time during exercise you
feel faint, dizzy, or experience pain, stop and consult your physician.
Obtain proper instruction prior to use.
Read, understand, and test the emergency stop procedures before use.
Inspect the elliptical for incorrect, worn, or loose components and do not use until corrected,
replaced, or tightened prior to use.
Do not wear loose or dangling clothing while using elliptical.
Care should be used when mounting or dismounting elliptical.
Disconnect all power (if applicable) before servicing elliptical.
Do not exceed maximum user weight of 350 lbs.
Keep children and animals away.
Do not operate an electrically powered elliptical in damp or wet locations.
All exercise equipment is potentially hazardous. If attention is not paid to the conditions of
equipment usage, death, or serious injury could occur.
Keep the top side of the moving surface clean and dry.
This machine is intended for residential use only.
All exercise equipment is potentially hazardous. If attention is not paid to the conditions of the
equipment usage, death or serious injury could occur.
*Should you need technical assistance in assembly of your TRUE Fitness product, contact TRUE Fitness Technical
Support at 1-800-883-8783.
PRE-ASSEMBLY CHECK LIST:
Tools Required:
10mm hex key (Included)
8mm hex key (Included)
6mm hex key (Included)
#2 Phillips Screwdriver
IMPORTANT SAFETY INSTRUCTIONS
Truefitness.com / 800.426.6570 / 636.272.7100
Hardware:
Hardware is packaged in
numbered plastic bags that
correspond to the step with
which they are used. Not all
steps require hardware.
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents