Step 2 Attach Top Wire Guard; Step 3 Attach Dome To Emitter; Step 4 Attach Dome Cap - Blue Rhino Endless Summer 81000 Owner's Manual

Contact 1-800-762-1142 for assistance.
Do not return to place of purchase.
Step 2–Attach Top Wire Guard
• Line up 4 prongs on Wire Guard Bottom with 4 holes on Emitter
Bottom, and Insert.
Note: It may be necessary to adjust the prongs slightly to line them up
with the holes.
Step 3–Attach Dome to Emitter
• Line up three studs in Emitter with holes in Dome. Slide Dome
carefully over studs, clamping Top Wire Guard securely in place.
Note: It may be necessary to adjust prongs of the Top Wire Guard
slightly to provide a secure fit.
• Install (3) Nuts on studs and tighten with 7/16" wrench.
Do not over tighten.
Step 4–Attach Dome Cap
• Lay Dome Cap on Dome covering 3 Nuts and line up center holes.
• Insert threaded end of Finial through Cap and screw into center of
Dome until secure.
Owner's manual and assembly instructions: 81000 portable outdoor heater 3/3/03 6