Lighting Instructions - Napoleon LD325SB Manual

Hide thumbs Also See for LD325SB:
Table of Contents

Advertisement

Available languages

Available languages

Lighting Instructions

!
!
WARNING!
operating.
N415-0401CE-GB-DE MAR 12.19
N415-0401CE-GB-DE MAR 12.19.indd 7
Left Burner
WARNING!
Open lid.
WARNING!
Ensure all burner controls are in the off position. Turn on the gas supply
valve.
Main Tube Burner Lighting
1. Open grill lid.
2. Push and turn any main burner knob slowly to
the 'hi' position. This action will ignite the pilot
flame which will in turn light the selected burner.
If the pilot lights, continue to push down on the
control knob until the burner lights and then
release.
3. If the pilot does not ignite, then immediately
turn the control knob back to the 'off position
and repeat step 2 several times.
4. If the pilot and burner will not ignite within
5 seconds, turn the control knob to the 'off'
position and wait 5 minutes for any excess gas
to dissipate. Either repeat steps 2 and 3 or light
with a match.
5. If lighting the unit with a match, clip the match
into the supplied lighting rod. Hold the lit match
down through the grill and sear plate while
turning the corresponding burner valve to high.
(If equipped) Do not use the rear burner (rotisserie burner) with the main burners
Side Burner
Right Burner
Side Burner Lighting
1. Open side burner cover.
2. Push and turn the side burner control knob
slowly to the 'hi' position. This action will ignite
the side burner
3. If the burner does not ignite, then immediately
turn the control knob back to the 'off' position and
repeat step 2 several times.
4. If the burner will not ignite within 5 seconds,
turn the side burner control knob to the 'off'
position and wait 5 minutes for any excess gas to
dissipate. Either repeat steps 2 and 3 or light with
7
Off Position
a match.
www.napoleon.com
3/15/2019 6:41:31 PM
EN

Advertisement

Table of Contents
loading

Table of Contents