Table of Contents
Advertisement
..,
t1j._
—1-
If you wish the machine to fasten the thread ends after
completing each letter, press the finishing button
before starting to sew. You can now trim the threads
between the letters or in the space between the words
without running the risk of pulling the threads.
4
Press the finishing button
when the whole pro
gram is finished. The threads to be trimmed are marked
When using cassette 3 to sew letters, it is necessary to
in white in the illustration. When sewing monograms we
cut the threads between the letters.
recommend that you sew at slightly reduced speed.
If you wish to sew a monogram, you can use the
decorations to be found at the bottom of the cassettes.
In some cases the decorations should be sewn the
original way. Others will be better symmetrically if the
final part is mirrored.
Should the letter start far to the left, you can increase
the space between the decoration and letter by inserting
an intermediary stitch.
The letters on cassettes 3 and 4 can also be mirrored
and you can sew a monogram from the wrong side of the
fabric using lurex thread or similar. Wind the lurex on
the bobbin.
You can also have a name programmed and sew a
pattern from cassette 2. As soon as you press the push
button "F", you can sew the programmed stitch or let
ters irrespective of which cassette is inserted in the
machine.
However, as soon as you switch off the machine, the
programming will disappear.
.
-.
51
Hide quick links:
Advertisement
Table of Contents
