Download Print this page

One Stop Gardens 91496 Assembly Instructions page 4

Wooden planter wagon

Advertisement

4.
To put on the Side Board (5), lift the hinged section of the Bottom Board (4)
(back) and match the holes of the Side Board (5). Thread the Bolt (6) and
Washer (10) through the hole in the Side Board (5) and back of Bottom
Board. Thread another Washer (10) on the end of Bolt (6) and tighten with
Nut (11). Repeat on opposite end and other side. See Figures D & E.
Side Board (5)
Hinged
Section of
Bottom
Board (4)
5.
Place the Handle (1) in the fork on the Carriage (3). Match up holes. Push
Bolt (8) with Washer (7) through hole. Place Washer (7) on Bolt and tighten
with Nut (11). See Figure F.
Handle (1)
Washer (10)
Nut (11)
Bolt (8)
Washer (10)
6.
This Wagon is for outdoor decorative purposes only. It is not designed to
haul objects. When used as a planter, it is suggested you line the Wagon
with a waterproof plastic lining (not included) to prevent the wood from
deteriorating when getting wet. Caution: This is not a toy and children
should be supervised when around the Wooden Planter Wagon. Do not
overload Wagon. Maximum weight is 35 Lbs.
SKU 91496
Figure D
Page 4
Bolt (6), Washer (10),
Washer (10), Nut (11)
Figure E
Fork on
Carriage (3)

Advertisement

loading