The 8021X Screen - ZyXEL Communications VMG1312-B Series User Manual

Table 12 Net work Set t ing > Net work Set t ing > Broadband ( cont inued)
LABEL
PhyR DS
Apply
Cancel

6.5 The 8021x Screen

You can view and configure t he 802.1x aut hent icat ion set t ings in t he 8 0 2 1 x screen. Click N e t w or k
Se t t in g > Br oa dba n d > 8 0 2 1 x t o display t he following screen.
Figure 26 Net work Set t ing > Broadband > 8021x
The following t able describes t he labels in t his screen.
Table 13 Net work Set t ing > Net work Set t ing > 8021x
LABEL
#
St at us
I nt erface
EAP I dent it y
EAP m et hod
Bidirect ional
Aut hent icat ion
Cert ificat e
Trust ed CA
Apply
Cancel
VMG1312-B Series User's Guide
DESCRIPTION
Enable or disable Ph yR D S ( downst ream ) for downst ream t ransm ission from t he WAN.
PhyR DS should be enabled if dat a being t ransm it t ed downst ream is sensit ive t o noise.
However, enabling PhyR DS can decrease t he DS line rat e. Enabling or disabling PhyR will
require t he CPE t o ret rain. For PhyR t o funct ion, t he DSLAM m ust also support PhyR and
have it enabled.
Click Apply t o save your changes back t o t he Device.
Click Ca nce l t o ret urn t o t he previous configurat ion.
DESCRIPTION
This is t he index num ber of t he ent ry.
This field displays whet her t he aut hent icat ion is act ive or not . A yellow bulb signifies t hat
t his aut hent icat ion is act ive. A gray bulb signifies t hat t his aut hent icat ion is not act ive.
This is t he int erface t hat uses t he aut hent icat ion. This displays N / A w hen t here is no
int erface assigned.
This shows t he EAP ident it y of t he aut hent icat ion. This displays N / A when t here is no EAP
ident it y assigned.
This shows t he EAP m et hod used in t he aut hent icat ion. This displays N / A when t here is no
EAP m et hod assigned.
This shows whet her bidirect ional aut hent icat ion is allowed.
This shows t he cert ificat e used for t his aut hent icat ion. This displays N / A when t here is no
cert ificat e assigned.
This shows t he Trust ed CA used for t his aut hent icat ion. This displays N / A when t here is no
Trust ed CA assigned.
Click Apply t o save your changes back t o t he Device.
Click Ca nce l t o ret urn t o t he previous configurat ion.
Chapter 6 Broadband
99